Air Guage Unit

Product Details:

Features:

• Every gauge carries a calibration certificate giving actual values
• Module 1A, Module 2A giving the most economical solution to your inspection needs on shop floor
• High pressure system: high speed of response and self cleaning of gauging area ensures accurate reading of size, taper and ovality at a time
• Non-contact gauging: long life due to minimal frictional wear
• Two setting Masters: ensures correct magnification of reading at all times
• System pressure check gauge: provides a constant check on the system pressure i.e. 3 bars (45 psi) regulated by a high precision regulator built into the unit
• For diameter 6 mm and above Module-1A air gauge unit is to be used
• For diameter below 6 mm Module-2A air gauge unit is to be used

Specifications:

Product Details:

Features:

• Air electronic Units are a combination of two highly reliable Systems to give combined advantages of non-contact, self-cleaning and advantage of high precision electronics
• The 2045-AE and 2045-AED have all features of the microprocessor based 2045 electronic column
• In addition, they have an in-built Air to Electronic converter which allows it to be used as an Air-Electronic read out with enhanced capability on the shop floor
• These gauges are virtually maintenance free and have a slim design that makes it very convenient for multi-gauging applications within a small space
• The 2045 AED works on a differential principle and can be adapted very easily for Match gauging or relation gauging applications in a multi-gauging environment
• Suitable for 2045-AE and 2045-AED
• Air Plugs (APG) / Air Rings (ARG) / Air Calipers (AC) with 2.07 mm jet diameter
• Supplied with quick connecting adaptors for connecting Air Plugs / Air Rings / Air Calipers

• If Air Plugs / Air Rings / Air Calipers require jet diameter of 1.5 or 0.6 mm, then it should specified accordingly

Product Details:

Features:

• Every gauge carries a calibration certificate giving actual values
• Accommodates all jet diameters of Air Plug Gauges, Air Ring Gauges & Air Calipers
• Facilitates quick & easy setting through Mag & Zero knobs
• Supplied with a fixed adaptor which fits all types of connectors
• Foldable feet for better Readability
• High pressure system: High speed of response and self cleaning of gauging area ensures accurate reading of size, taper and ovality at a time
• Non-contact Gauging: Long life due to minimal frictional wear
• Two Setting Masters: Ensures correct magnification of reading at all times
• System pressure check gauge: Provides a constant check on the system pressure i.e. 3 bars (45 psi) regulated by a high precision regulator built into the unit

Product Details:

Features:

• Combined advantages of non-contact air sensing and high precision electronics
• RS232 data output available for further processing like machine control through relay output or for SPC
• Can be supplied with analogue, column or digital readout units
• For diameter 6 mm and above AECM1 is to be used
• For diameter below 6 mm AECM2 is to be used

Product Details:

Features:

• Air-Electronic input from BAKER Air Plug and Ring Gauges (APG & ARG)
• Two metric measuring ranges: 200µm (resolution 0.1µm), 2000µm (resolution 1µm), and two Inch measuring ranges: 20.0 thou (resolution 0.01 thou) & 200 thou (resolution 0.1 thou)
• Measurement display in absolute or comparative form
• Auto calibration with two setting masters
• Keyboard entered upper & lower tolerance limits (UTL & LTL), applicable to the values displayed
• Static or dynamic (max, min, average & TIR) measurements
• Non-volatile storage of all menu entered values
• Combined advantages of non-contact air sensing and high precision electronics
• RS232 data output available for further processing like machine control through relay output or for SPC

Product Details:

Features:

• Quick and easy checking of bore
• Standard 2 jets for checking size, taper, ovality
• 3 jets at 120 degree for average size & tri-lobed effect (for diameter 6 mm & above)
• With extensions to check deeper bores
• Can be supplied to check through or blind bores
• Can be supplied with multiple jets
• Hard chrome plated for extended life
• Can be supplied with carbide sleeve on request
• For specific depth or land width checking, adjustable depth collars can be provided

Product Details:

• Two Jet Air Ring gauge to check outside diameter, taper & ovality
• Three jet Air Ring gauge for detecting tri-lobed effect for diameter above 6 mm only
• Can be supplied with tungsten carbide sleeve on request for checking hardened job
• Can be supplied with multiple jets

Product Details:

Product Details:

Features:

• Air calipers are ideal for measuring diameters of jobs held between the centers on machine or interrupted shafts like crankshafts
• “V” support for perfect centering and stability
• ‘’V” support with tungsten carbide pads for diameter above 16 mm
• Ideal for collared diameters i.e. crankshaft pin and journal
• Multi-jet air calipers available for multi-point measurement i.e. to check crowning of crank pins and journal diameters
• Can be supplied bench mounted for checking small diameters or against specific needs

Specifications:

Product Details:

Product Details:

Product Details:

Features:

• Used for setting of pneumatic length measuring instruments
• Made from oil hardening non shrinking gauge steel, hardened and tempered to 60-62 HRC
• Subzero treated at -80°C for long term dimensional stability
• Actual dimensions duly etched
• Calibrated at 20°C under Standards Room conditions against National/International traceable standards
• Certificate of calibration is provided along with each master traceable to National/International standards.
• Certificate under NABL (as per ISO 17025) as per request
• Manufactured as per DIN2250-1 Type B

Specifications: