Screw Thread Micrometer

Product Price :Get Latest Price

• Mechanical digit counter with 0.01mm or .001" reading for quick and error-free reading
• With a standard bar except for 0-25mm / 0 -1” model.
• Parallelism: (2+R/100)µm, R=max. range (mm) [.00008” + .00004” (L/4)]”, L= max. range (inch)

Product Price :Get Latest Price

• Flanged spindle for measuring width,depth, and location of grooves inside/outside bores, and tubes.
• Provided with two types of graduations for inside and outside measurements.
• Non-rotating spindle type has two directional ratchet stop.(Measuring force: 0.7 - 1.2N)

Technical Data:

• Accuracy: ±10µm / ± .0004”
• Parallelism: 10µm / .0004”

Product Price :Get Latest Price

• Used for the zero point setting of outside micrometers.
• Flat and lapped measuring faces.
• Heat insulating handle to prevent expansion due to body temperature.

Technical Data:

• Flatness: 0.3µm / .000012”
• Parallelism: 2µm / .00008

Product Price :Get Latest Price

• IP65 water/dust protection(Series 326).
• 60 degree or 55 degree V-anvil andconicalspindle(interchangeable)are optional,which are made of high-grade steel,hardened and precision ground.
• With Ratchet Stop for constant force.
• With SPC output (Series 326)
• With a standard bar except 0-25mm
• 0-1 in model
• Suplied in fitted plastic case.
• *Digital models **Analog models

• Zero-setting, Data hold, Data output, 2 Presets, Function lock.
• inch/mm conversion (inch/mm models)
• Alarm: Low voltage, Counting value composition error

• 05CZA662: SPC cable with data switch (1m/40”)*
• 05CZA663: SPC cable with data switch (2m/80”)*
• *Only for digital models

Specifications:

Product Price :Get Latest Price

• Measures the width, height, and depth of can seams.
• Three types of micrometers are available for: Steel cans, aluminum cans, and sprayer cans.
• Supplied in fitted carton.

Product Price :Get Latest Price

• Measures hub thickness and shoulders inside a bore.
• With Ratchet Stop for constant force.
• With a standard bar except for 0 -25mm /0-1in model.
• Supplied in fitted plastic case.

Product Price :Get Latest Price

• Retractable anvil with indicator for threewire measurements of pitch diameter of precision screws, and parallelism measurements.
• With a standard bar except for 0-25mm /0-1" model.
• IP protection level: 54
• Supplied in fitted plastic case.

• Spindle feed error: 3µm/ .00012"
• Dial indication accuracy: 1µm / .00004"
• Dispersion of indication: 0.4µm/ .00002"
• Flatness: 0.3µm/ .000012"
• Parallelism: 0.6µm/ .000024" for models up to 50mm / 2", 1µm/ .00004" for models over 50mm / 2"

• 04AZA124: 16mm / .63" workpiece stopper
• (not available for 25mm / 1" model)
• 04AZA125: 14mm / .55" workpiece stopper
• 04AZA126: 14mm / .55" workpiece stopper

Specifications:

Product Price :Get Latest Price

• With Ratchet Stop for constant force.
• With SPC output (Series 343).
• With a standard bar except 0 - 25mm and 0 - 1” model.
• Supplied in fitted plastic case.

• Origin-set, Zero-setting, Data hold, Data output, inch/mm
• conversion (inch/mm models)
• Alarm: Low voltage, Counting value composition error
• 05CZA662: SPC cable with data switch (1m / 40”)
• 05CZA663: SPC cable with data switch (2m / 80”)

Specifications: 

Product Price :Get Latest Price

• Used with an outside micrometer for measuring inside diameter of bores.
• 4 sizes of gages are supplied in a fitted case.
• Extra long for gaging deep and shallow holes, slots, and similar workpieces.
• Gaging surface is fully hardened to insure long tool life.

Specifications: 

Product Price :Get Latest Price

• Specially designed for the zero point setting of screw thread micrometers.
• Supplied in fitted carton.

Specifications:

Product Price :Get Latest Price

• Direct GO/NO-GO judgment for massproduced parts.
• Spindle diameter: 10.8mm (.425")
• IP protection level: 54
• Supplied in fitted plastic case.

• Dial indication accuracy: 1µm / .00005”
• Indication repeatability: 0.4µm / .00002”
• Flatness: 0.3µm / .000012”
• Parallelism: 0.6µm / .000024” for models up to 50mm / 2”, 1µm / .00004” for models over 50mm / 2”

Product Price :Get Latest Price

• Various types of indicator can be selected according to the measurement applications.
• Supplied in fitted plastic case.

Technical Data:

• Flatness: 0.3µm/.000012"
• Parallelism: 0.6µm/.000024" for models up to 50mm/2" 1µm/.00004" for models over 50mm/2"

Other Details:

Specifications:

Product Price :Get Latest Price

Product Price :Get Latest Price

• Fast and accurate method of thread measuring available for use with Micrometer
• Measure set of threadplug gages and working thread plug gages
• Monitor the wear on working thread plug gages
• Monitor and control pitch diameter variation during thread fabrication
• Reduce measurement time to a fraction of the time normally taken using the traditional threewire method
• Use in conjunction with “Go” and “No Go”thread ring gages to control thread size to the most demanding specifications
• Determine out of roundness and taper that may exist in threaded parts
• Applications for preplating and post plating thread measurement.
• Certification of accuracy included.
• Traceable to NIST.
• Meets or exceeds all ANSI and ISO specs.

Product Price :Get Latest Price

• Spring-loaded plunger expands within the bore (or groove), allowing determination of the internal diameter (or groove width).
• With a knurled clamp.
• Supplied in a fitted pouch.

Specifications: 

Product Price :Get Latest Price

• Designed to inspect parallelism and flatness of measuring faces of micromters.
• Each set consists of 4 thicknesses.
• Supplied in fitted wooden case.

Technical Data:

• Flatness: 0.1µm/.000004”
• Parallelism: 0.2µm/.000008”

Parallelism Check between Measuring Faces by Means of Interference Fringe Produced by an Optical Parallel:

• The parallelism between the measuring faces can be
• determined as follows; place the optical parallel to the anvil
• and observe the number of interference fringes produced
• on the spindle side under the measuring force of the
• micrometers.
• Fringe on the anvil side must not be more than one.

Product Price :Get Latest Price

• The Digimatic Tool Kits include Mitutoyo's highly popluar 0-1 in
• Digimatic Micrometer(choose ratchet or friction type)and 0-6 in Digimatic Calipers with ABSOLUTE Encoder.
• The case is made of handsome solid mahogany
• and has space for gage batteries. The micrometer spanner is supplied accessory.

Product Price :Get Latest Price

• Used for inspecting the flatness of micrometer's or gage block's measuring faces with high accuracy.
• Supplied in fitted wooden case.

Specifications:

Product Price :Get Latest Price

• Designed for measuring wire thickness.
• Also used to measure the diameter of a small ball.
• Supplied in fitted plastic case.

• Flatness: 0.6µm/.000024in
• Parallelism: 1.3µm/.00005in

Product Price :Get Latest Price

• These stands are designed to allow bench-top use with hand micrometers or other gages.

Product Price :Get Latest Price

• To measure odd workpieces, several convenient anvil attachments are prepared by MITUTOYO.
• Among them the most often used one is the ball attachment.
• The ball attachments are hardened steel balls with .200” and .250” diameters which are placed on the .250” and .315” diameter anvils, respectively, by rubber caps.
• With these attachments, regular micrometers can measure cylindrical wall thickness, .200” or .250” must be subtracted from the readings.
• Other attachments shown here are either .500” or 10mm in length.
• The added amount must be subtracted from the reading.

• Tip length: metric type: 10mm ±5μm inch type: .5" ±.0002"

Product Price :Get Latest Price

• Specially designed for the zero point setting of V-anvil micrometers.
• Supplied in fitted carton.

Specifications: