Micrometer

Approx. Rs 4,999 / PieceGet Latest Price

• Flatness: 0.6µm / .000024”
• Parallelism: 5µm / .0002” for models up to 375mm / 15”
• 6µm / .00024” for models up to 475mm/19”
• 7µm / .00028” for models over 500mm / 20”

• Preset, Zero-setting, Power ON/OFF, Data hold, Data output,
• inch/mm conversion (inch/mm models)
• Alarm: Low voltage, Counting value composition error

• 959149: SPC cable (40"/1m)
• 959150: SPC cable (80"/2m)
• 04AZB512: SPC cable (L-type(40'/2m)
• 04AZB513: SPC cable L-type(80"/2m)

Approx. Rs 70,000 / PieceGet Latest Price

• Enabling .000005”/ 0.1μm resolution measurement, this micrometer is ideal for customers who need to make highly accurate measurements with a hand-held tool.
• A highly rigid frame and high-performance constant-force mechanism* enable more stable measurement, while the clicks emitted while the work piece is being measured assure the operator that measurement is proceeding normally. * Patent pending in Japan, the United States of America, the European Union, and China.
• Body heat transferred to the instrument is reduced by a (removable) heat shield, minimizing the error caused by thermal expansion of the frame when performing handheld measurements.
• The ABS (absolute) rotary sensor also eliminates the need to perform origin setting each time the power is turned on, letting you start measuring straight away. With no possibility of over speed errors, the High-Accuracy Digimatic Micrometer also delivers a higher level of reliability.

• Flatness: 0.3μm/.000012”
• Parallelism: 0.6μm/.000024

• Preset (ABS measurement system)
• Zero-setting (INC measurement system)
• Hold, Resolution switching, Function lock, On/off, Auto power off, Measurement data output, Error alarm

• 05CZA662: SPC cable with data switch (1m/40”)
• 05CZA663: SPC cable with data switch (2m/80”)

Approx. Rs 1,999 / NumberGet Latest Price

• Hammertone-green, baked-enamelfinished frame.
• Ratchet Stop for exact repetitive readings.
• With a standard bar except for 0-25mm model.

• Flatness: 0.6µm for models up to 300mm 1µm for models over 300mm
• Parallelism: (2+R/100)µm, R=max. range (mm)

Approx. Rs 1,999 / NumberGet Latest Price

• Hammertone-green, baked-enamelfinished frame.
• Ratchet Stop or Friction Thimble for exact repetitive readings.
• With a standard bar except for 0-1" model

Approx. Rs 3,999 / NumberGet Latest Price

• IP65 water/dust protection 340 series models with a range up to 12in/300mm.
• Wide measuring range with interchangeable anvils.
• With a Ratchet Stop for constant force.
• Supplied with zero-setting standards bar for each range.
• With SPC output (Series 340).
• Supplied in fitted wooden case.

Technical Data:

• Accuracy: ±(4+R/75)ìm, R=max. range (mm)[.00016” ±.00004 (L/3)”] L = Max Range (Inch)
• Flatness: 0.6µm/.000024” for models up to 300mm/12” 1µm/.00004” for models over 300mm/12”
• Parallelism: 2µm/.00008” for models up to 75mm/3” 3µm/.00012” for models up to 150mm/6” (2+R/100)µm for models over 150mm, R=max. range (mm) [.00008” ± .00004 (L/4)”] L= Max range (inch)

Approx. Rs 2,999 / NumberGet Latest Price

• With dial indicator for direct GO/NG-GO judgment for mass-produced parts.
• Anvil retracting trigger for quick measurement.
• With a standard bar except for 0-25mm model.
• Supplied in fitted plastic case.
  
  

• Flatness: 0.6µm
• Parallelism: (2+R/100)µm, R=max.range (mm)
• Dial Indicator Is An Option

Specifications:

Approx. Rs 4,999 / PieceGet Latest Price

• Coolant Proof Micrometers MDC-MX Series
• Twice as Long Battery Life as before and Drastic Improvement in Measurement Efficiency
• IP65 protection level, enabling use in environments exposed to cutting oil, etc*.
• Anti-corrosion treatment is required after use.
• Measurement data output function is available with a water-resistant connection cable.
• Auto power ON/OFF function.
• Certificate of inspection* is included.
• 50mm/2” or less range models
• It is not the type used to obtain calibration certificates.

• Flatness: 0.3µm/.000012”
• Parallelism: 1µm/.00004” for models up to 50mm/2”
• 2µm/.00008” for models up to 100mm/4”
• 3µm/.00012” for models up to 175mm/7”
• 4µm/.00016” for models up to 275mm/11”
• 5µm/.0002” for models over 300mm/12”

• Origin-set, Zero-setting, Automatic power on/off, Data hold,
• Data output, inch/mm conversion (inch/mm models)

• 05CZA662: SPC cable with data switch (1m/40”)
• 05CZA663: SPC cable with data switch (2m/80”)

Approx. Rs 4,999 / PieceGet Latest Price

• Provided only with a zero-set key for easy origin setting.
• A ratchet stop or friction thimble for a constant measuring force.
• Measurement readout with large characters on the LCD screen.
• No spindle clamp. No data output
• Supplied in fitted plastic case

• Flatness: 0.3µm / .000012”
• Parallelism: 2µm / .00008”

• Origin-set, Automatic power on/off, inch/mm conversion (inch/mm models)
• Alarm: Low voltage, Counting value composition error

Approx. Rs 9,000 / PieceGet Latest Price

• Faster measurement with 2mm per rev. instead of the standard 0.5
• A patented ratchet thimble mechanism helps ensure repeatability
• A function lock helps prevent error IP-65 protection level
• Certificate of inspection is provided.
• With a standard bar except for 0-25mm/0-1" model
• Supplied in fitted plastic case.

• Flatness:0.3µm/.000012”
• Parallelism: 1µm/.00004” for models up to 50mm/2”, 2µm/.00008” for models up to 100mm/4”

• Origin-set, Zero / ABS, Hold, Function lock Auto power on/off ,
• Data output (output models),
• inch/mm conversion (on inch/metric models only)
• Alarm: Low voltage, Counting value composition error

• 05CZA662: SPC cable with data switch (1m/40”)
• 05CZA663: SPC cable with data switch (2m/80”)
• 516-529-26 Inspection Gage Block Set
• Rectangular Steel Gage Block 10 pc. blocks and 1 pc. optical parallel
• 516-319-26 Inspection Gage Block Set
• Rectangular Cera Gage Block 10 pc. blocks and 1 pc. optical parallel

Specifications:

Approx. Rs 7,000 / PieceGet Latest Price

• Constant and low measuring force mechanism in the thimble.
• Adjustable measuring force* accommodates various kind of work materials. *0.5-2.5N or 2-10N
• The measurement-value hold function automatically retains the data at a specified measuring force, ensuring accuracy.
• Non-rotating spindle and the new ratchet friction thimble.
• Speedy spindle feed of 10mm/rev. and .4”/rev for inch/metric model.
• With absolute linear scale.
• With SPC data output.
• With a standard bar to set the origin point (for models with 15 - 30mm / .6” - 1.2” range).
• Supplied in fitted plastic case.

• Flatness: 0.3µm/.000012”
• Parallelism: 2µm/.00008”

• Origin-set, Power ON/OFF, Data hold, Data output, Preset
• (15-30mm / .6 - 1.2” range model), inch/mm conversion
• (inch/mm models)
• Alarm: Low voltage, Counting value composition error

• 937387: SPC cable (1m / 40”)
• 965013: SPC cable (2m / 80”)

Approx. Rs 7,000 / NumberGet Latest Price

• The Quickmike provides a speedy spindle feed of 10mm/.4” per thimble rotation as compared to the conventional micrometer with 0.5mm/.025” per rotation.
• Its wide 30mm/1.2” measuring range allows various workpieces with different shapes to be measured quickly.
• Non-rotating spindle and the new ratchet friction thimble.
• With absolute linear scale.
• IP54 dust/water protection (when not connected with data output cable).
• With SPC data output.
• With a standard bar to set the origin point (for models with a range over 30mm/1.2”).
• Supplied in fitted plastic case.

• Flatness: 0.3µm/.000012”
• Parallelism: 2µm/.00008” for models up to 80mm/3.2” 3µm/.00012” for models up to 105mm/4.2”

• Origin-set, Zero-setting, Data hold, Data output, inch/mm conversion (inch/mm models)
• Alarm: Low voltage, Counting value composition error

• 937387:SPC cable (1m/40”)
• 965013:SPC cable (2m/80”)

Specifications: 

Approx. Rs 1,999 / NumberGet Latest Price

• Satin-chrome-finished frame, tapered (on the anvil side) for hard-to-reach places.
• With a standard bar except for 0-1" models.
• Supplied in fitted plastic case.
• .0001 reading is obtained with vernier

Approx. Rs 3,999 / NumberGet Latest Price

• Ratchet function works both from the thimble and the speeder,allowing easy one-handed operation.
• Clearly audible ratchet operation for reassurance that measurement is being performed at constant,preset force.
• Provided with a Certificate of Inspection.
• With a standard bar except for 0-25mm and 0-1in models.
• Supplied in fitted case.
• Heat-Insulated frame.

• Flatness:0.6µm/.000024in
• Parallelism:2µm/.00008in

Approx. Rs 3,999 / NumberGet Latest Price

• Heat-insulated frame, tapered (on the anvil side) for hard-to-reach places.
• With a standard bar except for 0-25mm
• A ratchet stop for a constant measuring force.
• Supplied in a fitted plastic case.

• Flatness:0.3µm
• Parallelism: 1µm for 25mm model 3µm for models up to 100mm

Specifications: 

Approx. Rs 8,999 / NumberGet Latest Price

• With a standard bar except for 0-25mm/0-1in model.
• With SPC output
• Supplied in a fitted plastic case.

• Flatness: 0.3µm / .000012”
• Parallelism: 3µm / .00012” for models up to 75mm / 3”* 4µm / .000016” for models over 75mm / 3”* 1.6µm / .000063” for models up to 50mm / 2”** 2µm / .00008” for models over 50mm / 2”**

• Origin-set, Zero-setting, Data hold, Data output, inch/mm
• conversion (inch/mm models)
• Alarm: Low voltage, Counting value composition error

• 05CZA662: SPC cable with data switch (1m / 40”)
• 05CZA663: SPC cable with data switch (2m / 80”)

Specifications: 

Product Price :Get Latest Price

• IP65 water/dust protection (Series 342).
• Pointed spindle and anvil for measuring the web thickness of drills, small grooves, keyways, and other hard-to-reach dimensions.
• 15 degree and 30 degree measuring points
• are available.
• The measuring points have approximately 0.3mm / .012” radius.
• With Ratchet Stop for constant force.
• With SPC output (Series 342).
• With digit counter (Series 142).
• With a standard bar except 0 - 25mm and 0 - 1” model.
• Supplied in fitted plastic case.

• Function of Digital Model Origin-set, Zero-setting, Data hold, inch/mm conversion (inch/mm models)
• Alarm: Low voltage, Counting value composition error
• Optional Accessories for Digital Model
• 05CZA662: SPC cable with data switch (1m/40”)
• 05CZA663: SPC cable with data switch (2m/80”)

Product Price :Get Latest Price

• Measures the outside diameter of cutting heads(such as taps,reamers,end mills) with odd number of flutes.
• With Ratchat Stop for constant force.
• Supplied with setting standard.
• V-anvils with a centerline grove are available.
• They are useful for measuring pitch diameters of of taps which have a small diamter by using single-wire method.
• With SPC output (Series 314).
• Supplied in fitted plastic case.

• Flatness (spindle/anvil):
• Analog model: 0.6µm/.000024”, 1.3µm/.00005"
• Digital Model: 0.3µm/.000012". 1µm/.00004"

• Zero-setting, Data hold, Data output, Preset, inch/mm conversion (inch/mm models)
• Alarm: Low voltage, Counting value composition error
• Function Lock
• 2 presets

• 05CZA662: SPC cable with data switch (1m / 40”)
• 05CZA663: SPC cable with data switch (2m / 80”)

Specifications:

Product Price :Get Latest Price

• IP65 water/dust protection
• Designed to measure the wall thickness of various tubing.
• With Rachet Stop for constant force.
• With SPC output.
• With a standard bar except 0-25mm and 0-1in model.
• Supplied in fitted case.

• Flatness: 0.6µm/.000024”

• Origin-set, Zero / ABS, Data hold, Data output,
• inch/mm conversion (on inch/metric models only)
• Alarm: Low voltage, Counting value composition error

• 05CZA662: SPC cable with data switch (1m/40”)
• 05CZA663: SPC cable with data switch (2m/80”)

Specifications: 

Product Price :Get Latest Price

• Designed to measure the wall thickness of various tubing.
• With Ratchet Stop for constant force.
• Supplied in fitted plastic case.

Product Price :Get Latest Price

• IP65 water/dust protection (Series 395).
• Designed to measure the wall thickness of various tubing.
• The Tube Micrometers have two combinations of measuring faces (carbidetipped): spherical-flat type.
• Cylindrical anvils (perpendicular) are also available.
• With Ratchet Stop for constant force.
• With SPC output (Series 395).
• With digit counter (Series 295).
• Supplied in fitted plastic case.

• Origin-set, Zero-setting, Data hold, Data output, inch/mm
• conversion (inch/mm models)
• Alarm: Low voltage, Counting value composition error

• 05CZA662: SPC cable with data switch (1m / 40”)
• 05CZA663: SPC cable with data switch (2m / 80”)

Specifications:

Product Price :Get Latest Price

• Designed to measure the wall thickness of various tubing.
• The Tube Micrometers have two combinations of measuring faces (carbidetipped): spherical-flat type, and spherical type.
• Cylindrical anvils (perpendicular) are also available.
• With Ratchet Stop for constant force.
• With SPC output (Series 395).
• With digit counter (Series 295).
• Supplied in fitted plastic case.

• Origin-set, Zero-setting, Data hold, Data output, inch/mm
• conversion (inch/mm models)
• Alarm: Low voltage, Counting value composition error

• 05CZA662: SPC cable with data switch (1m / 40”)
• 05CZA663: SPC cable with data switch (2m / 80”)

Specifications:

Product Price :Get Latest Price

• Measures thickness of sheet metal, paper, plastic, and rubber parts.
• With Ratchet Stop for constant force.
• With a standard bar except for 0 - 25mm / 0 - 1” model.
• IP65 water/dust protection (Series 389*). *Except for 389-513/389-713
• Supplied in fitted plastic case.

• Origin-set, Zero-setting, Data hold, Data output, inch/mm
• conversion (inch/mm models)
• Alarm: Low voltage, Counting value composition error

• 05CZA662: SPC cable with data switch (1m / 40”)
• 05CZA663: SPC cable with data switch (2m / 80”)
• 937387: SPC cable for 389-513/389-713 (1m / 40”)
• 965013: SPC cable for 389-513/389-713 (2m / 80”)

Product Price :Get Latest Price

• The anvil and the spindle have a blade for measuring the groove diameter of shafts, keyways, and other hard-to-reach areas.
• With Ratchet Stop for constant force.
• Speedy spindle feed of 10mm / .4"/rev. (Quickmike type).
• With a standard bar except 0 -25mm and 0 - 1" model.
• Supplied in fitted plastic case.

• Origin-set, Zero-setting, Data hold, Data output, inch/mm conversion (inch/mm models)
• Alarm: Low voltage, Counting value composition error

• 05CZA662: SPC cable with data switch (1m / 40”)
• 05CZA663: SPC cable with data switch (2m / 80”)
• 937387: SPC cable for Quickmike type (1m / 40”)
• 965013: SPC cable for Quickmike type (2m / 80”)

Product Price :Get Latest Price

• 0.7mm / .028” (1mm: models over 100mm) edge thickness to enter narrow recesses.
• With Ratchet Stop for constant force.
• With a standard bar except for 25mm / 0 - 1” model.
• With SPC output (Series 323).
• The Series 223 is provided with a mechanical digit counter for quick reading of measurements.
• Supplied in fitted plastic case. (Over 100mm models supplied wooden cases)

• Flatness: 1µm / .00004” for models up to 100mm / 4”
• 1.6µm / .000063” for models over 100mm / 4“
• Parallelism: 4µm / .00016” for models up to 50mm / 2” .00024” for models up to 4”
• (4+R/50)µmfor models up to 100mm
• (5+R/75)µm for models over 100mm, R=max. range (mm)

• Origin-set, Zero-setting, Data hold, Data output, inch/mm
• conversion (inch/mm models)
• Alarm: Low voltage, Counting value composition error

• 05CZA662: SPC cable with data switch (1m / 40”)
• 05CZA663: SPC cable with data switch (2m / 80”)

Product Price :Get Latest Price

• IP65 water/dust protection (324 series).
• Measures over-pin diameter of gears with precision steel (carbide) ball-tipped measuring faces.
• With a standard bar except 0-25mm and 0-1” model
• Interchangeable ball anvil-spindle tips for various gear modules (0.5 - 5.25) are optional.
• With Ratchet Stop for constant force.
• With SPC output (Series 324).
• Supplied in fitted plastic case (models over 150mm supplied in wooden case).

• Zero-setting, Data hold, Data output, Preset, inch/mm
• conversion (inch/mm models)
• Alarm: Low voltage, Counting value composition error
• Function Lock
• 2 Presets

• 05CZA662: SPC cable with data switch (1m / 40”)*
• 05CZA663: SPC cable with data switch (2m / 80” )*
• *Only for digital models

Specifications:

Product Price :Get Latest Price

• Provided with a 60 degree V-anvil and conical spindle for easily measuring pitch diameters of metric or unified screw threads.
• With Ratchet Stop for constant force.
• With a standard bar for zero point adjustment except 0-25mm model.
• Supplied in fitted plastic case.

• Accuracy: ±(2+R/75)µm, R=max. range (mm)
• Spindle feed error: 3µm

Product Price :Get Latest Price

• IP65 water/dust protection (Series 331).
• The anvil and spindle have a small diameter for measuring splined shafts,slots, and keyways.
• With Ratchet Stop for constant force.
• With SPC output (Series 331).
• With a standard bar except 0-25mm and 0-1” model.
• Supplied in fitted plastic case.

• Flatness: 0.3µm/.000012”
• Parallelism:(2+R/100)µm,R=max. range (mm) [.00008” + .00004” (L/4”)] L = max. range (inch)

• Origin-set, Zero-setting, Data hold, Data output, inch/mm
• conversion (inch/mm models)
• Alarm: Low voltage, Counting value composition error

• 05CZA662: SPC cable with data switch (1m/40”)
• 05CZA663: SPC cable with data switch (2m/80”)

Specifications:

Product Price :Get Latest Price

• IP54/65 water/dust protection(Series 342).
• Measures the height of crimp contacts.
• With Ratchet Stop for constant force.
• With SPC output(Series 342).
• With digit counter counter(Series 142).
• Supplied in fitted plastic case

• Digital models **Analog models Function of Digital Model Origin-set, Zero-setting, Data hold, Data output, inch/mm conversion (inch/mm models)
• Alarm: Low voltage, Counting value composition error
• Optional Accessories for Digital Model 05CZA662: SPC cable with data switch (1m / 40”) 05CZA663: SPC cable with data switch (2m / 80”) 937387: SPC cable for Quickmike type (1m / 40”) 965013: SPC cable for Quickmike type (2m / 80”)

Product Price :Get Latest Price

• Non-rotating spindle with optional seven interchangeable anvils (flat, spline, spherical, point, knife-edge, disk, and blade) for a wide range of applications.
• Interchangeable anvils (pair) are optional.
• With a standard bar except 0 - 25 mm and 0-1” model.
• V-anvils and conical spindle tips (matching pair) for screw thread measurement are also available.
• With Ratchet Stop for constant force.

• Spindle feed error: 3μm / .00012”
• Accuracy: ±.0002in

Product Price :Get Latest Price

• Designed to measure the wall thickness of various tubing.
• With Ratchet Stop for constant force.
• With digit counter .
• Supplied in fitted plastic case.

Product Price :Get Latest Price

• Origin-set, Zero / ABS, Data hold, Data output,
• inch/mm conversion (on inch/metric models only)
• Alarm: Low voltage, Counting value composition error

• 05CZA662: SPC cable with data switch (1m / 40”)
• 05CZA663: SPC cable with data switch (2m /80”)

Product Price :Get Latest Price

• IP65 water/dust protection (Series 317)
• Measures tubing thickness, shoulderedge distance, rivet head height, etc
• With interchangeable anvils (flat anvil, rod anvil,V-anvil).
• Supplied with Flat Anvil (201216) and Rod Anvil: ø3mm/.118” rod anvil (201217) for 0-25mm/0-1” models, ø5mm/.197” (201379) for 25-50mm / 1-2” model.
• With special Disk Anvils. The Uni-Mike is used as a height micrometer.The disks have a lapped, mirror surface.
• With a standard bar except 0-25mm and 0 -1” model.
• Supplied in fitted plastic case.

• Function of Digital Model Origin-set, Zero-setting, Data hold, Data output, inch/mm conversion (inch/mm models)
• Alarm: Low voltage, Counting value composition error

• 05CZA662: SPC cable with data switch (1m/40”)*
• 05CZA663: SPC cable with data switch (2m/80”)*
• 201218: V-anvil
• 950758: Disk anvil for 25m (1") models
• 950759: Disk anvil for 50m (2") models

Product Price :Get Latest Price

• Non-rotating spindle.
• With Ratchet Stop for constant force.
• Supplied in fitted plastic case.

• Flatness: 1µm/.00004”
• Parallelism: 3µm/.00012”

Product Price :Get Latest Price

• The Disk Micrometer is designed to easily measure root tangent length of spur gears and herical gears.
• Non-rotating spindle eliminates torque on workpiece.
• With standard bar except 0 - 15mm, 0 - .6” 0 - 25mm, 0 - 1”, 0 - 300mm & 0 - 1.2” model
• Speedy spindle feed of 10mm/rev. (Quickmike type).
• With Ratchet Stop for constant force.
• With SPC output (Series 369).
• Supplied in fitted plastic case

• Parallelism: 4µm / .00016” for models up to 50mm / 2”
• 6µm / .00024” for models over 50mm / 2”

• Origin-set, Zero-setting, Data hold, Data output, inch/mm
• conversion (inch/mm models)
• Alarm: Low voltage, Counting value composition error

• 05CZA662: SPC cable with data switch (1m / 40”)
• 05CZA663: SPC cable with data switch (2m / 80”)
• 937387: SPC cable for Quickmike type (1m / 40”)
• 965013: SPC cable for Quickmike type (2m 80”)

Specifications:

Product Price :Get Latest Price

• Can be used as a GO/±NG gage by setting the upper and lower limits.
• Supplied in fitted plastic case.

• Flatness: 0.6µm
• Parallelism: (3+R/100)µm, R=max. range (mm)
• Accuracy: ±3µm

Specifications: 

Approx. Rs 2,000 / PieceGet Latest Price